JUNIOR ENGINEER JE EXAM COACHING IN JALANDHAR

Helpline : 9464645100 | 9463138669

Call 9463138669, Anand Classes –SSC Junior Engineer (JE) Exam Coaching Center in Jalandhar.

ANAND CLASSES offers SSC Junior Engineer (JE) Exam Coaching in Urban Estate Phase-II Jalandhar. ANAND CLASSES is the prevalent establishment in the Jalandhar for SSC exams. It is surely famous for its selective class management classes and productive Best SSC Junior Engineer (JE) Exam coaching institute in Jalandhar. 

The faculty at ANAND CLASSES is highly qualified and vastly experienced in successfully coaching students for SSC Exams.

ANAND CLASSES is known as leading institute for preparation of SSC Junior Engineer (JE) Exam Coaching in Jalandhar. We at ANAND CLASSES provide coaching for SSC Junior Engineer (JE) Exam from the past 15 years. The SSC Junior Engineer (JE) Exam Coaching Center in Jalandhar, Punjab.

Fresh batches for SSC Junior Engineer (JE) Exam are going to start. ANAND CLASSES Coaching Institute is the only well known coaching institute in Jalandhar that provides coaching for SSC Exams. At ANAND CLASSES Coaching Institute, we constantly strive to improve our teaching methodology, study material and classroom assignments. The Course Methodology is dynamic as it takes into account the changes that we notice in the pattern of the examination. 

ANAND CLASSES is a professionally managed and organized SSC Junior Engineer (JE) Exam coaching centre in Jalandhar, offering best coaching and preparing the job aspirants in Government Department.

ANAND CLASSES is the best coaching center for SSC Exams.

ANAND CLASSES is best coaching Institute for SSC JE Coaching in Jalandhar for preparation of SSC JE entrance examination. It was established in the year of 1996 with the objective of providing SSC JE Exam Coaching in Jalandhar. Additionally we shapeup our engineering student to crack the SSC JE written Examination. From the very beginning, numerous students are become the part of Government job as Jr. Engineers though the Staff Selection Commission Junior Engineers exam. 

Our Institution Is situated at the Jalandhar for Coaching for SSC Junior Engineer. There is an attempt to provide the need of applicants ideally for aggressive examinations. 

Our main objective is offered the Best Coaching Classes for the SSC JE in Jalandhar so that candidates get their goal and also satisfy their fantasy of achieve the administration positions as a JR. Engineers. It is the SSC JE Exam Coaching in Jalandhar. We not only effort for the coaching classes, we also focused on the mentally growth & Development of students under our guidance for the Best SSC JE Exam Coaching in Jalandhar. 

Our Standard of teaching is high and simple so that students can easily capture the topics which teach by our professional teachers. Our rate of Success is going to increase every year due to our unique methodology of teaching.

Staff Selection Commission is going to conduct a written examination for JUNIOR ENGINEER (CIVIL) and (ELECTRICAL) in Central Public Works Department (CPWD) & Department of Posts, JUNIOR ENGINEER (CIVIL) and JUNIOR ENGINEER(ELECTRICAL AND MECHANICAL) in Border Roads Organization (BRO) in Ministry of Defense, JUNIOR ENGINEER (ELECTRICAL & MECHANICAL) & JUNIOR ENGINEER (Quantity Surveying & Contract) in Military Engineering Service (MES), JUNIOR ENGINEER (CIVIL & MECHANICAL) in Central Water Commission (CWC) Candidates who are devoted to be a Junior Engineer  must have information about exam pattern & syllabus of this exam.

Streams for Preparations Of SSC JE Exams

SSC JE Electrical Coaching:

Electrical Engineering, we have specific staff of teaching who has PhD in their own specialised subject. They instruct every last subjects of Electrical engineer furthermore give some tips to endeavor in the least times. We give Coaching classes to SSC JE electrical Engineer in Jalandhar. We additionally outlined our Study materials as indicated by the structural designer & firstly coverage of the whole syllabus of the Electrical. Syllabus of Electrical is excessively immeasurable which is gathered in one booklet by our personnel. Different booklets are for electrical engineer with practice sets are given by us to build up their future furthermore to get the target of clear SSC JE electrical Engineering.

SSC JE Mechanical Coaching:

We provide exclusive coaching classes for the SSC JE Mechanical Engineering in Jalandhar. We have Mechanical Engineering specialised teaching faculty who teach their students with unique strategies so that they can easily learn various things. We also give doubts classes for Mechanical engineering. Delhi Career Academy is famous for the teaching quality that’s why it is become the 1st preference for the Mechanical SSC JE coaching in Jalandhar. Mechanical engineering study notes are developed by our own staff and collect. Computerised study notes are intensive and also contain practice sets. Tests series are provided by us for Mechanical engineer. Our result of SSC JE Mechanical is consistently increasing.

SSC JE Electronics Coaching:

We give best coaching classes to the SSC JE Electronics Engineering in Jalandhar. We have teachers of Electronics Engineering qualified form the well reputed government university. They educate their candidates with remarkable techniques so they can without much of a stretch learn different things. We likewise give question clarifying classes for Electronics building. ANAND CLASSES is popular for the instructing quality that is the reason it is turned into the first inclination for the Electronics SSC JE coaching centre in Jalandhar. Electronics building study notes are created by our own particular staff and gather. Modernized study notes are serious furthermore contain rehearse sets. Tests arrangements are given by us to Engineer classes of Electronics. Our consequence of SSC JE Electronics is reliably expanding.

Eligibility Criteria For SSC JE Exam Preparations

Educational qualification:

Candidates who want to be appearing in the SSC JE entrance Examination must have the degree or diploma in Mechanical, Electrical and civil engineering from the recognized institute or university.

Examination Pattern of SSC JE:

SSC JE entrance Examination is consisting of two Paper I and Paper II. The Examination was of 500 total marks including both examination papers.

Paper I: Objective type (200 Marks)

·         General Awareness and Current Affairs (50 marks)

·         General Intelligence & reasoning (50 marks)

·         General engineering (100 marks)

o    Part A: Civil and Structural

o    Part B: Electrical

o    Part C: Mechanical

Paper II: Conventional type (300 Marks)

Part A: General Structural & civil Engineering

Part B: General Electrical Engineering

Part C: Mechanical Engineering

There is also negative marking for every wrong question.

Details Of Syllabus  

The standard of the questions in Engineering subjects will be approximately of the level of Diploma in Engineering (Civil/ Electrical/ Mechanical) from a recognized Institute, Board or University recognized by All India Board of Technical Education. All the questions will be set in SI units. The details of the syllabus are given below.

(i) General Intelligence & Reasoning: The Syllabus for General Intelligence would include questions of both verbal and non-verbal type. The test may include questions on analogies, similarities, differences, space visualization, problem solving, analysis, judgement, decision making, visual memory, discrimination, observation, relationship concepts, arithmetical reasoning, verbal and figure classification, arithmetical number series etc. The test will also include questions designed to test the candidate‘s abilities to deal with abstract ideas and symbols and their relationships, arithmetical computations and other analytical functions.

(ii) General Awareness: Questions will be aimed at testing the candidate‘s general awareness of the environment around him/her and its application to society. Questions will also be designed to test knowledge of current events and of such matters of everyday observations and experience in their scientific aspect as may be expected of any educated person. The test will also include questions relating to India and its neighboring countries especially pertaining to History, Culture, Geography, Economic Scene, General Polity and Scientific Research, etc. These questions will be such that they do not require a special study of any discipline.

(iii) General Engineering (Civil and Structural), (Electrical & Mechanical):

Part-A

Civil Engineering – Building Materials, Estimating, Costing and Valuation, Surveying, Soil Mechanics, Hydraulics, Irrigation Engineering, Transportation Engineering, Environmental Engineering.

Structural Engineering – Theory of Structures, Concrete Technology, RCC Design, Steel Design.

Part-B

Electrical Engineering – Basic concepts, Circuit law, Magnetic Circuit, AC Fundamentals, Measurement and Measuring instruments, Electrical Machines, Fractional Kilowatt Motors and single phase induction Motors, Synchronous Machines, Generation, Transmission and Distribution, Estimation and Costing, Utilization and Electrical Energy, Basic Electronics.

Part-C

Mechanical Engineering – Theory of Machines and Machine Design, Engineering Mechanics and Strength of Materials,

Properties of Pure Substances, 1st Law of Thermodynamics, 2nd Law of Thermodynamics, Air standard Cycles for IC Engines, IC Engine Performance, IC Engines Combustion, IC Engine Cooling & Lubrication, Rankine cycle of System, Boilers, Classification, Specification, Fitting & Accessories, Air Compressors & their cycles, Refrigeration cycles, Principle of Refrigeration Plant, Nozzles & Steam Turbines.

Properties & Classification of Fluids, Fluid Statics, Measurement of Fluid Pressure, Fluid kinematics, Dynamics of Ideal fluids, Measurement of Flow rate, basic principles, Hydraulic Turbines, Centrifugal Pumps, Classification of steels.

Paper II –

Part-A

Civil & Structural Engineering

Civil Engineering – 

Building Materials : Physical and Chemical properties, classification, standard tests, uses and manufacture/quarrying of materials e.g. building stones, silicate based materials, cement (Portland), asbestos products, timber and wood based products, laminates, bituminous materials, paints, varnishes.

Estimating, Costing and Valuation : estimate, glossary of technical terms, analysis of rates, methods and unit of measurement, Items of work – earthwork, Brick work (Modular & Traditional bricks), RCC work, Shuttering, Timber work, Painting, Flooring, Plastering. Boundary wall, Brick building, Water Tank, Septic tank, Bar bending schedule, Center line method, Mid-section formula, Trapezoidal formula, Simpson‘s rule. Cost estimate of Septic tank, flexible pavements, Tube well, isolates and combined footings, Steel Truss, Piles and pile-caps. Valuation – Value and cost, scrap value, salvage value, assessed value, sinking fund, depreciation and obsolescence, methods of valuation.

Surveying : Principles of surveying, measurement of distance, chain surveying, working of prismatic compass, compass traversing, bearings, local attraction, plane table surveying, theodolite traversing, adjustment of theodolite, Leveling, Definition of terms used in leveling, contouring, curvature and refraction corrections, temporary and permanent adjustments of dumpy level, methods of contouring, uses of contour map, tachometer survey, curve setting, earth work calculation, advanced surveying equipment.

Soil Mechanics : Origin of soil, phase diagram, Definitions-void ratio, porosity, degree of saturation, water content, specific gravity of soil grains, unit weights, density index and interrelationship of different parameters, Grain size distribution curves and their uses. Index properties of soils, Atterberg‘s limits, ISI soil classification and plasticity chart. Permeability of soil, coefficient of permeability, determination of coefficient of permeability, Unconfined and confined aquifers, effective stress, quick sand, consolidation of soils, Principles of consolidation, degree of consolidation, per-consolidation pressure, normally consolidated soil, e-log p curve, computation of ultimate settlement. Shear strength of soils, direct shear test, Vane shear test, Triaxial test. Soil compaction, Laboratory compaction test, Maximum dry density and optimum moisture content, earth pressure theories, active and passive earth pressures, Bearing capacity of soils, plate load test, standard penetration test.

Hydraulics : Fluid properties, hydro statics, measurements of flow, Bernoulli‘s theorem and its application, flow through pipes, flow in open channels, weirs, flumes, spillways, pumps and turbines.

Irrigation Engineering : Definition, necessity, benefits, 2II effects of irrigation, types and methods of irrigation, Hydrology – Measurement of rainfall, run off coefficient, rain gauge, losses from precipitation – evaporation, infiltration, etc. Water requirement of crops, duty, delta and base period, Kharif and Rabi Crops, Command area, Time factor, Crop ratio, Overlap allowance, Irrigation efficiency. Different type of canals, types of canal irrigation, loss of water in canals. Canal lining – types and advantages. Shallow and deep to wells, yield from a well. Weir and barrage, Failure of weirs and permeable foundation, Slit and Scour, Kennedy‘s theory of critical velocity. Lacey‘s theory of uniform flow. Definition of flood, causes and effects, methods of flood control, water logging, preventive measure. Land reclamation, Characteristics of affecting fertility of soils, purposes, methods, description of land and reclamation processes. Major irrigation projects in India.

Transportation Engineering : Highway Engineering – cross sectional elements, geometric design, types of pavements, pavement materials – aggregates and bitumen, different tests, Design of flexible and rigid pavements – Water Bound Macadam (WBM) and Wet Mix Macadam (WMM), Gravel Road, Bituminous construction, Rigid pavement joint, pavement maintenance, Highway drainage, Railway Engineering- Components of permanent way – sleepers, ballast, fixtures and fastening, track geometry, points and crossings, track junction, stations and yards. Traffic Engineering – Different traffic survey, speed-flow-density and their interrelationships, intersections and interchanges, traffic signals, traffic operation, traffic signs and markings, road safety.

Environmental Engineering : Quality of water, source of water supply, purification of water, distribution of water, need of sanitation, sewerage systems, circular sewer, oval sewer, sewer appurtenances, sewage treatments. Surface water drainage. Solid waste management – types, effects, engineered management system. Air pollution – pollutants, causes, effects, control. Noise pollution – cause, health effects, control.

Structural Engineering

Theory of structures : Elasticity constants, types of beams – determinate and indeterminate, bending moment and shear force diagrams of simply supported, cantilever and over hanging beams. Moment of area and moment of inertia for rectangular & circular sections, bending moment and shear stress for tee, channel and compound sections, chimneys, dams and retaining walls, eccentric loads, slope deflection of simply supported and cantilever beams, critical load and columns, Torsion of circular section.

Concrete Technology : Properties, Advantages and uses of concrete, cement aggregates, importance of water quality, water cement ratio, work ability, mix design, storage, batching, mixing, placement, compaction, finishing and curing of concrete, quality control of concrete, hot weather and cold weather concreting, repair and maintenance of concrete structures.

RCC Design : RCC beams-flexural strength, shear strength, bond strength, design of singly reinforced and double reinforced beams, cantilever beams. T-beams, lintels. One way and two way slabs, isolated footings. Reinforced brick works, columns, staircases, retaining wall, water tanks (RCC design questions may be based on both Limit State and Working Stress methods).

Steel Design : Steel design and construction of steel columns, beams roof trusses plate girders.

Part-B

Electrical Engineering –

Basic concepts : Concepts of resistance, inductance, capacitance, and various factors affecting them. Concepts of current, voltage, power, energy and their units.

Circuit law : Kirchhoff‘s law, Simple Circuit solution using network theorems.

Magnetic Circuit : Concepts of flux, mmf, reluctance, Different kinds of magnetic materials, Magnetic calculations for conductors of different configuration e.g. straight, circular, solenoid, etc. Electromagnetic induction, self and mutual induction.

AC Fundamentals : Instantaneous, peak, R.M.S. and average values of alternating waves, Representation of sinusoidal wave form, simple series and parallel AC Circuits consisting of R.L. and C, Resonance, Tank Circuit. Poly Phase system – star and delta connection, 3 phase power, DC and sinusoidal response of R-Land R-C circuit.

Measurement and measuring instruments : Measurement of power (1 phase and 3 phase, both active and re-active) and energy, 2 watt meter method of 3 phase power measurement. Measurement of frequency and phase angle. Ammeter and voltmeter (both moving oil and moving iron type), extension of range watt meter, Multi-meters, Meager, Energy meter AC Bridges. Use of CRO, Signal Generator, CT, PT and their uses. Earth Fault detection.

Electrical Machines : (a) D.C. Machine – Construction, Basic Principles of D.C. motors and generators, their characteristics, speed control and starting of D.C. Motors. Method of braking motor, Losses and efficiency of D.C. Machines. (b) 1 phase and 3 phase transformers – Construction, Principles of operation, equivalent circuit, voltage regulation, O.C. and S.C. Tests, Losses and efficiency. Effect of voltage, frequency and wave form on losses. Parallel operation of 1 phase /3 phase transformers. Auto transformers. (c) 3 phase induction motors, rotating magnetic field, principle of operation, equivalent circuit, torque-speed characteristics, starting and speed control of 3 phase induction motors. Methods of braking, effect of voltage and frequency variation on torque speed characteristics.

Fractional Kilowatt Motors and Single Phase Induction Motors : Characteristics and applications.

Synchronous Machines – Generation of 3-phase e.m.f. armature reaction, voltage regulation, parallel operation of two alternators, synchronizing, control of active and reactive power. Starting and applications of synchronous motors.

Generation, Transmission and Distribution – Different types of power stations, Load factor, diversity factor, demand factor, cost of generation, inter-connection of power stations. Power factor improvement, various types of tariffs, types of faults, short circuit current for symmetrical faults. Switch gears – rating of circuit breakers, Principles of arc extinction by oil and air, H.R.C. Fuses, Protection against earth leakage / over current, etc. Buch holtz relay, Merz-Price system of protection of generators & transformers, protection of feeders and bus bars. Lightning arrests, various transmission and distribution system, comparison of conductor materials, efficiency of different system. Cable – Different type of cables, cable rating and derating factor.

Estimation and costing : Estimation of lighting scheme, electric installation of machines and relevant IE rules. Earthing practices and IE Rules.

Utilization of Electrical Energy : Illumination, Electric heating, Electric welding, Electroplating, Electric drives and motors.

Basic Electronics : Working of various electronic devices e.g. P N Junction diodes, Transistors (NPN and PNP type), BJT and JFET. Simple circuits using these devices.

       Part- C

Mechanical Engineering-

Theory of Machines and Machine Design-

Concept of simple machine, Four bar linkage and link motion, Flywheels and fluctuation of energy, Power transmission by belts – V-belts and Flat belts, Clutches – Plate and Conical clutch, Gears – Type of gears, gear profile and gear ratio calculation, Governors – Principles and classification, Riveted joint, Cams, Bearings, Friction in collars and pivots.

Engineering Mechanics and Strength of Materials – Equilibrium of Forces, Law of motion, Friction, Concepts of stress and strain, Elastic limit and elastic constants, Bending moments and shear force diagram, Stress in composite bars, Torsion of circular shafts, Bucking of columns – Euler‘s and Rankin‘s theories, Thin walled pressure vessels.

Thermal Engineering-

Properties of Pure Substances : p-v & P-T diagrams of pure substance like H2O, Introduction of steam table with respect to steam generation process; definition of saturation, wet & superheated status. Definition of dryness fraction of steam, degree of super heat of steam. H-s chart of steam (Mollier‘s Chart).

1st Law of Thermodynamics : Definition of stored energy & internal energy, 1st Law of Thermodynamics of cyclic process, Non Flow Energy Equation, Flow Energy & Definition of Enthalpy, Conditions for Steady State Steady Flow; Steady State Steady Flow Energy Equation.

2nd Law of Thermodynamics : Definition of Sink, Source Reservoir of Heat, Heat Engine, Heat Pump & Refrigerator; Thermal Efficiency of Heat Engines & co-efficient of performance of Refrigerators, Kelvin – Planck & Clausius Statements of 2nd Law of Thermodynamics, Absolute or Thermodynamic Scale of temperature, Clausius Integral, Entropy, Entropy change calculation of ideal gas processes. Carnot Cycle & Carnot Efficiency, PMM-2; definition & its impossibility.

Air standard Cycles for IC engines : Otto cycle; plot on P-V, T-S Planes; Thermal Efficiency, Diesel Cycle; Plot on P-V, T-S planes; Thermal efficiency.

IC Engine Performance, IC Engine Combustion, IC Engine Cooling & Lubrication.

Rankine cycle of steam : Simple Rankine cycle plot on P-V, T-S, h-s planes, Rankine cycle efficiency with & without pump work.

Boilers; Classification; Specification; Fittings & Accessories : Fire Tube & Water Tube Boilers.

Air Compressors & their cycles; Refrigeration cycles; Principle of a Refrigeration Plant; Nozzles & Steam Turbines

Fluid Mechanics & Machinery

Properties & Classification of Fluid : ideal & real fluids, Newton‘s law of viscosity, Newtonian and Non-Newtonian fluids, compressible and in compressible fluids.

Fluid Statics : Pressure at a point.

Measurement of Fluid Pressure : Manometers, U-tube, Inclined tube.

Fluid Kinematics : Stream line, laminar & turbulent flow, external & internal flow, continuity equation.

Dynamics of ideal fluids : Bernoulli‘s equation, Total head; Velocity head; Pressure head; Application of Bernoulli‘s equitation.

Measurement of Flow rate Basic Principles : Venturesome, Pilot tube, Orifice meter.

Hydraulic Turbines : Classifications, Principles.

ANAND CLASSES Facilities Which Make It Best Coaching Centre For SSC JE Exam:

As we know, competition level is rising day by day and students are put all their efforts to on the SSC JE entrance examination. ANAND CLASSES is the one who provide platform to the students to improve you and get knowledge and learn so many things for the SSC JE Electrical & Electronics Exam coaching in Jalandhar. As we know that syllabus of SSC JE is too much vast, ANAND CLASSES help you to complete your syllabus with interesting teaching methodology.  It provides the excellent Coaching Classes for the SSC JE in Jalandhar.

Various batches of engineering’s Subjects:

·        We provide SSC JE Batches of Engineering as given below:

·        Electrical Engineering (EE).

·        Electrical & Electronics Engineering.

·        Electronics & Communication Engineering.

Programme of Coaching

·        Coaching Classrooms

·        Series of Online Test

·        Series of Mock Test

·        Series of Classroom Test

·        Interview

Batches

·        Flexible Timing of Batches

·        Morning Batch

·        Evening Batch

·        Weekend Batches

·        Crash Course

Main Highlights:

·        Professional and Permanent Teaching Faculty

·        Various Examination Strategies

·        Computerized Study Notes

·        Past year’s Question Papers

·        Booklets & Practice sets

·        Analyze Tests

·        Coverage of syllabus

·        Free Guidelines for the SSC JE Interview

-----------------------------------------------------------------------------------

SSC JE COACHING CENTRE IN JALANDHAR

Director : Neeraj Anand

ANAND CLASSES-SCHOOL OF COMPETITIONS, JALANDHAR

Urban Estate Phase-II, Near MGN School, Jalandhar

Contact No. 9463138669, 9464645100

Tags : Best SSC JE coaching in jalandhar, Best SSC JE coaching institute in Jalandhar, Best SSC JE Exam Coaching in Jalandhar, Best SSC JE Coaching Centre in Jalandhar, Best SSC JE Coaching Classes in Jalandhar, SSC JE coaching in jalandhar, SSC JE coaching institute in Jalandhar, SSC JE Exam Coaching in Jalandhar, SSC JE Coaching Centre in Jalandhar, SSC JE Coaching Classes in Jalandhar, SSC JE coaching in punjab, SSC JE coaching institute in punjab, SSC JE Exam Coaching in punjab, SSC JE Coaching Centre in punjab, SSC JE Coaching Classes in punjab, SSC JE COACHING CENTRE JALANDHAR